Dell PowerConnect 5224 - Page 13

l Hardware Version
l Microcode Version
l Loader Version
l Boot-ROM Version
l Operation Code Version
l Total Port Number
l Role
l Service Tag
l Serial Number
CLI Commands
The following table summarizes the equivalent CLI command for items in the Switch/General/Versions page.
Example
Console#show version
Unit1
Serialnumber:123457
Servicetag:3
Hardwareversion:/2002
Numberofports:24
Masterpowerstatus:up
Backuppowerstatus:up
Agent(master)
Unitid:1
Loaderversion:0.0.5.5
Bootromversion:0.0.6.0
Operationcodeversion:0.2.0.0
Console#
Logs
The Logs page allows you to scroll through the logged system and event messages. The switch can store up to 2 kilobytes (KB) of log entries in temporary
random access memory (RAM) (memory flushed on power reset) and up to 4 KB of entries in permanent flash memory.
Command
Usage
show
version
Displays hardware and software version information for the system, as well as the unit's
power status