EasyManua.ls Logo

Dell PowerConnect 5424

Dell PowerConnect 5424
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
142 ⡏⼂ ⎆⠻ ถ⇛
ΫѐӶ əí 3
᝾⯦ᆖ
Ⴓ⯚
❶⹚ႚ
㣶❶ᣃᝢ᝾
.
Next, an IP address is setup. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is
the IP address you use to access the CLI, Web interface, or SNMP
interface for the switch.
To setup an IP address:
Please enter the IP address of the device (A.B.C.D):
Please enter the IP subnet mask (A.B.C.D or /nn):
IP
ⶖ☦
IP
▶⊦
Ṣ✾㔆Ḗ
Ჿ㨃ᝢ᝾
.
⪢Ḗ
᥾⩎
IP
ⶖ☦ᳶ
192.168.1.100
Ჿ㧲ᅺ
IP
▶⊦
✾㔆ᳶ
255.255.255.0
Ჿ㨃ᝢ᝾
.
Enter
᚞ḟᝢ᝾
.
ΫѐӶ əí 4
᝾⯦ᆖ
Ⴓ⯚
❶⹚ႚ
㣶❶ᣃᝢ᝾
.
Finally, setup the default gateway. Please enter the IP address
of the gateway from which this network is reachable
(e.g. 192.168.1.1):
ዊ→
ᄦⰎ㝒⮂ⰎḖ
Ჿ㨃ᝢ᝾
.
Enter
᚞ḟᝢ᝾
.
᝾⯦
❶⹚ႚ
㣶❶ᣃᝢ᝾
(
⮞⯲
⪢⫚
ႳⰎ
Ჿ
):
This is the configuration information that has been collected:
SNMP Interface = "Dell Network Manager"@192.168.1.10
User Account setup = admin
Password = **********
Management IP address = 192.168.1.100 255.255.255.0
Default Gateway = 192.168.1.1

Table of Contents

Other manuals for Dell PowerConnect 5424

Related product manuals