Dell PowerConnect M6220 - Page 35

Switching Configuration 35
Figure 3-2. LAG/Port-channel Example Network Diagram
Example 1: Create Names for Two Port-Channels:
console#configure
console(config)#interface port-channel 1
console(config-if-ch1)#description lag_1
console(config-if-ch1)#exit
console(config)#interface port-channel 2
console(config-if-ch2)#description lag_2
console(config-if-ch2)#exit
Example 2: Add the Physical Ports to the Port-Channels:
console(config)#interface ethernet 1/g2
console(config-if-1/g2)#channel-group 1 mode auto
Subnet
3
Port 1/0/8
LAG_20
Layer 2 Switch
Port 1/0/9
LAG_20
Server
Port 1/0/2
LAG_10
Port 1/0/3
LAG_10
Layer 3 Switch
Subnet 3Subnet 2
Port 1/g2
LAG_1
Port 1/g3
LAG_1
Port 1/g8
LAG_2
Port 1/g9
LAG_2