Dell PowerEdge C6100

Using the Baseboard Management Controller 21
Table 1-14. IMPI LAN Commands (NETFUN: 0CH, 0DH)
Commands NetFn CMD O/M Supported
Set LAN Configuration Parameters Transport 01H M Yes
Get LAN Configuration Parameters Transport 02H M Yes
Suspend BMC ARP Transport 03H O Yes
Get IP/UDP/RMCP Statistics Transport 04H N No
Table 1-15. IMPI Serial/Modem Commands (NETFUN: 0CH, 0DH)
Commands NetFn CMD O/M Supported
Set Serial/Modem Configuation Transport 10H N No
Get Serial/Modem Configuration Transport 11H N No
Set Serial/Modem Mux Transport 12H N No
Get Tap Response Codes Transport 13H N No
Set PPP UDP Proxy Transmit Data Transport 14H N No
Get PPP UDP Proxy Transmit Data Transport 15H N No
Send PPP UDP Proxy Packet Transport 16H N No
Get PPP UDP Proxy Receive Data Transport 17H N No
Serial/Modem Connection Active Transport 18H N No
Callback Transport 19H N No
Set User Callback Options Transport 1AH N No
Get User Callback Options Transport 1BH N No
Table 1-16. SOL Commands (NETFUN: 0CH, 0DH)
Commands NetFn CMD O/M Supported
SOL Activating Transport 20H M Yes
Set SOL Configuration Parameters Transport 21H M Yes
Get SOL Configuration Parameters Transport 22H M Yes