Dell PowerEdge FX2 - B Components Used in this Guide

17 PowerEdge FX2 - Upgrading from 10GbE Pass-through Modules to FN410S I/O Modules | version 1.0
B Components used in this guide
The components and versions used while developing this guide are shown below.
Component
Software Version
Dell 10GbE pass-through module
NA
PowerEdge FN410S IOM
Dell Networking OS 9.10(0.1)
Dell Networking S4048-ON ToR switch
Dell Networking OS 9.10(0.1)
PowerEdge FX2 Chassis Management Controller
1.30