2 PowerEdge FX2 - Upgrading from 10GbE Pass-through Modules to FN410S I/O Modules | version 1.0
Revisions
Jim Slaughter, Mark Fisher, Shree Rathinasamy
Copyright © 2016 Dell Inc. or its subsidiaries. All Rights Reserved.
Except as stated below, no part of this document may be reproduced, distributed or transmitted in any form or by any
means, without express permission of Dell.
You may distribute this document within your company or organization only, without alteration of its contents.
THIS DOCUMENT IS PROVIDED “AS-IS”, AND WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED. IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY
DISCLAIMED. PRODUCT WARRANTIES APPLICABLE TO THE DELL PRODUCTS DESCRIBED IN THIS DOCUMENT
MAY BE FOUND AT: http://www.dell.com/learn/us/en/vn/terms-of-sale-commercial-and-public-sector-warranties
Performance of network reference architectures discussed in this document may vary with differing deployment
conditions, network loads, and the like. Third party products may be included in reference architectures for the
convenience of the reader. Inclusion of such third party products does not necessarily constitute Dell’s recommendation of
those products. Please consult your Dell representative for additional information.
Trademarks used in this text:
Dell™, the Dell logo, PowerEdge™ and Force10™ are trademarks of Dell Inc. Other Dell trademarks may be used in this
document. Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and/or names or their products and are the property of their respective owners. Dell disclaims proprietary interest in
the marks and names of others. Other trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and/or names or their products and are the property of their respective owners. Dell disclaims
proprietary interest in the marks and names of others.
To Next Page
Loading...
