Dell PowerEdge M830 - RAID Controller Specifications; Drive Specifications; Hard Drives; Optical Drives

RAID controller specifications
The PowerEdge M830 system supports PERC H330, PERC H730, and PERC H730P controllers.
Drive specifications
Hard drives
The PowerEdge M830 system supports:
• Up to four 2.5-inch SAS/SATA/PCIe SSDs or SAS/SATA hard drives
• Up to twelve 1.8-inch SAS SSDs
Optical drives
The PowerEdge M830 system supports external optional USB DVD optical drive.
NOTE: DVD devices support only data.
Flash drive
The PowerEdge M830 system supports:
• Internal optional USB
• Internal optional SD card
• Optional vFlash card (with integrated iDRAC Enterprise)
Ports and connectors specifications
USB ports
The PowerEdge M830 system supports:
• One 4-pin, USB 2.0-compliant and one 9-pin, USB 3.0-compliant on the front panel
• Internal two 4-pin, USB 2.0-compliant
SD cards
The PowerEdge M830 system supports two internal SD cards dedicated for the hypervisor.
NOTE: One SD card is dedicated for future vFlash support.
Mezzanine card specification
The PowerEdge M830 system supports four PCIe x8 Gen 3 slots mezzanine card supporting dual-port 10
Gb Ethernet, quad port 1 Gb, FC8 Fiber Channel, FC16 Fiber Channel, or Infiniband mezzanine cards.
19