Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing a hard drive or SSD
After working inside your system
Removing a hard drive or SSD blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To maintain proper system cooling, all empty hard drive or SSD slots must have hard
drive or SSD blanks installed.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
Press the release latch and slide the hard-drive or SSD blank out of the hard drive or SSD slot.
Figure 44. Removing a 2.5-inch hard-drive blank
1. hard drive or SSD blank 2. release latch
111
To Next Page
Loading...
Need help?
General