Installing System Components 137
Figure 3-24. Removing and Installing a Processor
CAUTION: Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
11
Carefully, lift the processor out of the socket and leave the release lever up
so that the socket is ready for the new processor.
1 processor 2 notches in processor (2)
3 socket keys (2) 4 processor shield
5 ZIF socket 6 socket-release lever
7 pin 1 indicators (2)
book.book Page 137 Thursday, February 18, 2010 2:06 PM
To Next Page
Loading...
