88 Installing System Components
If the drive has been online, the green
activity/
fault indicator flashes as
the drive is powered down. When the drive indicators are off, the drive is
ready for removal.
3 Press the release button.
The hard-drive carrier handle lifts automatically.
4
Slide the hard-drive carrier out until it is free of the drive bay.
See
Figure 3-5
.
CAUTION: To maintain proper system cooling, all empty hard-drive bays must
have drive blanks installed.
5
Insert a drive blank in the empty drive bay. See "Installing a Hard-Drive
Blank" on page 87.
6
If applicable, install the front bezel. See "Installing the Front Bezel" on
page 83.
Figure 3-5. Removing and Installing a Hard-Drive Carrier
1 release button 2 hard-drive carrier
3 hard-drive carrier handle
book.book Page 88 Thursday, February 18, 2010 2:06 PM
To Next Page
Loading...
