CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
2. Hold the system board holder, lift the blue release pin, lift the system board, and then slide it toward the front of the chassis.
Sliding the system board toward the front of the chassis disengages the connectors from the back of the chassis slots.
3. Lift the system board out of the chassis.
Figure 93. Removing the system board
1.
thumb screw 2. system board holder
3. system board
Next steps
1. Install the system board.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the system board
After working inside your system
150
To Next Page
Loading...
