Steps
Holding the touch points, lift the cooling shroud away from the system.
Figure 22. Removing the cooling shroud
1.
slot on the chassis (4) 2. touch point (2)
3. cooling shroud 4. guide slot on the cooling shroud (4)
Next steps
1. Install the cooling shroud.
2. If required, install the full-length PCIe card.
3. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the cooling shroud
After working inside your system
Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
68
To Next Page
Loading...
