Dell PowerEdge R830 - Page 89

3. processor 4. open rst socket release lever
5. unlock icon
Figure 34. Removing a processor
1.
close rst socket-release lever 2. pin-1 indicator of processor
3. processor 4. slot (4)
5. processor shield 6. open rst socket-release lever
7. socket 8. socket keys (4)
Next steps
1. Replace the processor(s).
2. Install the heat sink.
3. Reinstall the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the cooling shroud
Removing a heat sink
Installing a heat sink
Installing the cooling shroud
After working inside your system
89