11. If applicable, place the system upright on a flat, stable surface and rotate the system feet outward.
12. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Figure 41. Removing and Installing the External Cooling Fan
1. back of the system chassis
2. lower hooks (2)
3. external cooling fan
4. screws (4)
5. upper hook
6. external cooling fan power cable slot
7. external cooling fan power cable
Figure 42. Cabling—External Cooling Fan
1.
external cooling fan power cable 2. securing clip on system board
83
To Next Page
Loading...
