Figure 4. Connecting to the PDU
After you connect the power cables, the base enclosure automatically starts up.
Discover your system
Once you have completed installing your base enclosure, discover your newly installed enclosure.
Refer to the PowerStore Networking Guide for PowerStore T Models for details.
Upgrade PowerStore software
PowerStore systems come pre-installed with the latest version of PowerStore software that was available at the time of
shipment. After installing the PowerStore system, Dell recommends upgrading the PowerStore software to the latest available
version. Refer to the PowerStore Software Upgrade Guide for detailed instructions.
10
Install a new base enclosure
To Next Page
Loading...
