Dell PowerStore 500T - Page 4

Verify the operation of a new 4-port card............................................................................................................ 26
Return a faulted part.................................................................................................................................................. 26
Replace an SFP.................................................................................................................................................................. 27
Identify a faulted SFP module from PowerStore Manager............................................................................... 27
Remove an SFP module............................................................................................................................................. 27
Install an SFP module..................................................................................................................................................27
Verify the operation of a replacement SFP module............................................................................................ 28
Return a faulted part.................................................................................................................................................. 28
Replace an I/O module.................................................................................................................................................... 28
Before you begin..........................................................................................................................................................29
Identify a faulted I/O module from PowerStore Manager................................................................................ 29
Base enclosure I/O module LEDs............................................................................................................................ 29
Power down the node................................................................................................................................................ 29
Remove a faulted I/O module.................................................................................................................................. 30
Install a new I/O module............................................................................................................................................30
Power up the node.......................................................................................................................................................31
Verify the operation of a replacement I/O module.............................................................................................. 31
Return a faulted part...................................................................................................................................................31
Replace a fan module........................................................................................................................................................ 31
Before you begin..........................................................................................................................................................32
Identify a faulted fan module from PowerStore Manager.................................................................................32
Power down the node................................................................................................................................................ 32
Remove the node........................................................................................................................................................ 32
Remove the top cover from the node....................................................................................................................34
Remove the faulted fan module...............................................................................................................................34
Install a new fan module............................................................................................................................................ 35
Install the top cover on the node............................................................................................................................ 36
Install the node............................................................................................................................................................. 37
Power up the node...................................................................................................................................................... 37
Verify the operation of a replacement fan module..............................................................................................38
Return a faulted part.................................................................................................................................................. 38
Replace a dual inline memory module (DIMM)...........................................................................................................38
Before you begin..........................................................................................................................................................38
Identify a faulted DIMM from PowerStore Manager.......................................................................................... 38
Power down the node................................................................................................................................................ 39
Remove the node........................................................................................................................................................ 39
Remove the top cover from the node....................................................................................................................40
Remove the faulted dual inline memory module................................................................................................... 41
Install the dual inline memory module..................................................................................................................... 42
Install the top cover on the node............................................................................................................................ 42
Install the node.............................................................................................................................................................43
Power up the node......................................................................................................................................................44
Verify the operation of a replacement DIMM.......................................................................................................44
Return a faulted part.................................................................................................................................................. 44
Replace an internal M.2 boot module...........................................................................................................................45
Before you begin..........................................................................................................................................................45
Identify a faulted internal M.2 boot module from PowerStore Manager.......................................................45
Establish connectivity to the peer node via SSH................................................................................................ 45
Power down the node................................................................................................................................................ 45
Remove the node........................................................................................................................................................ 46
4
Contents