Dell PowerVault MD3200 - Installing a RAID Controller Module Blank

210 Management: Installing Array Components
5 Connect all the power cables to the array.
6 Turn on the array and the host server.
Figure 15-7. Removing and Installing a RAID Controller Module Blank
Installing a RAID Controller Module Blank
To install a RAID controller module blank:
1
Align the blank with the RAID controller module bay
2 Insert the blank into the chassis until it clicks into place.
1 release latch 2 RAID controller module blank
1 2
book.book Page 210 Tuesday, September 27, 2011 3:25 PM