Dell PowerVault MD3220 - Removing a Hard Drive from a Hard-Drive Carrier

Management: Installing Array Components 195
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See
Figure 15-5 for PowerVault MD3200 and
Figure 15-6 for PowerVault MD3220.
Figure 15-5. Removing and Installing a Hard Drive Into a 3.5-Inch Drive Carrier
1 screws (4) 2 drive carrier
3 SAS screw hole 4 hard drive
4
2
1
3
book.book Page 195 Monday, June 21, 2010 11:00 AM