80 Configuration: About Your Storage Array
written by the RAID controller modules to the Event Log match the event
timestamps written to host log files. The RAID controller modules remain
available during synchronization.
To synchronize the RAID controller module clocks with the storage
management station:
1
In the AMW, select
Storage Array
Synchronize RAID Controller
Module Clocks
.
2
If a password is set, in the
Enter Password
dialog, type the current
password for the storage array, and click
Synchronize
.
The RAID controller module clocks are synchronized with the storage
management station.
book.book Page 80 Monday, June 21, 2010 11:00 AM
To Next Page
Loading...
