Figure 1. Loading the Cartridge
To Unload a Cartridge
To unload a cartridge using the mouse right-click method (Windows only):
1. While running Windows
®
Explorer locate the drive letter for the device.
2. Right-click on the device and select Eject.
3. When the cartridge has been ejected by the unit, grasp the exposed sides of the cartridge and
pull the cartridge straight out (see Figure 2).
To unload a cartridge using the eject button:
1. Push the eject button.
2. When the cartridge has been ejected by the unit, grasp the exposed sides of the cartridge and
pull the cartridge straight out (see Figure 2).
To unload a cartridge when the unit is in Low Power Mode [RD1000 USB 3.0 External only]:
1. Push and hold the eject button for approximately 10 seconds.