2 Install the:
a Riser 1 module
b Top cover
3 Follow the procedure in After working inside your computer.
Removing riser1 Graphics Card
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Top cover
b Riser 1 module
3 To remove the riser1 graphics card:
NOTE
: If installed, disconnect graphics card power cable from graphics card.
a Pull the release tab [1] to open the riser1 slot.
b Push the release tab on the PCIe slot [2], lift out the graphics card from the slot [3].
62
Removing and installing components
To Next Page
Loading...
