Dell Precision 5820 Tower - Side Cover

Table 1. Screw list (continued)
Component Screw type Quantity
PDB Board #6-32X1/4 inches 3
PDB Bracket M3X6.5mm 1
Slim ODD Plug M3X6.5mm 2
HDD Bracket M3X6.5mm 1
5.25" ODD Bracket
● #6-32 UNC X6.0mm
● M3X6.5mm
● 2
● 2
System Board #6-32X1/4 inches 10
Middle Fan Fixed Bracket #6-32X1/4 inches 1
Middle Fan Bracket #6-32X1/4 inches 3
Rear Fan Bracket #6-32X1/4 inches 2
HSBP Board M3X6.5mm 2
Slim ODD Fixed Bracket M2X2.0mm 2
Slim ODD M3X6.5mm 1
5.25" ODD M3X4.5mm 4
3.5" HDD Bracket M3X4.5mm 4
2.5" HDD Bracket M3X4.5mm 4
2nd CPU Support Bracket #6-32X1/4 inches 2
2nd CPU Board #6-32X1/4 inches 5
UPI Fixed Bracket M3X5.0mm 1
CPU Cooler T-30 torx bolt 4
Liquid Cooler Module
● #6-32X1/4 inches
● #6-32 UNC X3.5mm
● T-30 torx bolt
● 4
● 6
● 4
M.2 Carrier Cover
● M2X6mm
● M2X3mm
● 1
● 2
Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Philips #2 screwdriver
● Plastic scribe
NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4.
Side cover
Removing the side cover
1. Follow the procedure in Before working inside your computer.
18
Removing and installing components