21. 24 pin power cable 22. Front panel port
23. Power remote 24. USB 2_INT
25. System fan 0 26. USB 2_flex
27. Front panel USB3.2 port 28. Front panel USB3.1 port
29. SATA 0, 1, 2, 3, 4, 5 and ODD 0, 1 ports 30. VROC_key
NOTE: PCIE0 (Callout 10) is only present/supported on motherboards designed for Xeon W Series Processors.
RAID controller battery
Removing the RAID controller battery
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. To remove the RAID controller battery:
a. Disconnect the RAID controller battery cable from the RAID controller card.
b. Push the securing tab out to release the RAID controller battery.
74
Removing and installing components
To Next Page
Loading...
