Coin cell battery
Removing the coin cell battery
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
3. To remove the coin cell battery:
a. Press the release latch [1] away from the battery to allow the battery to pop-up from the socket [2].
b. Lift the coin-cell battery out of the system board.
Installing the coin cell battery
1. Place the coin-cell battery into its slot on the system board.
2. Press the coin-cell battery with positive (+) side facing up until the release latch springs back into place and secures it to the
system board.
3. To install:
a. side cover
Removing and installing components
55
To Next Page
Loading...
