Table 8. Security (continued)
Option Description
● Enabled—Default
● One Time Enable
● Disabled
Admin Setup Lockout
Allows you to prevent users from entering Setup when an administrator password is set.
● Enable Admin Setup Lockout
This option is not set by default.
Master Password
Lockout
Allows you to disable master password support.
● Enable Master Password Lockout
This option is not set by default.
NOTE: Hard Disk password should be cleared before the settings can be changed.
Secure boot
Table 9. Secure Boot
Option Description
Secure Boot Enable
Allows you to enable or disable the Secure Boot Feature.
Click one of the following options:
● Disabled—Default
● Enabled
Expert Key Management
Allows you to enable or disable Expert Key Management.
● Enable Custom Mode
This option is not set by default.
The Custom Mode Key Management options are:
● PK(Default)
● KEK
● db
● dbx
Performance
Table 10. Performance
Option Description
Multi Core Support
This field specifies whether the processor has one or all cores
enabled. The performance of some applications improves with
the additional cores.
● Active Processor Cores
Choose any number from 01–08:
NOTE: To enable Trusted Execution mode, all the cores
must be enabled.
System Setup 99
To Next Page
Loading...
