Dell Precision 5820 Tower - Page 95

Table 6. System Configuration (continued)
Option Description
Drives
Tower 5820
Allows you to enable or disable various drives on board.
The options are:
● MiniSAS PCIe SSD-0
● SATA-0
● SATA–2
● SATA–4
● ODD–0
● MiniSAS PCIe SSD-1
● SATA–1
●
SATA–3
● SATA–5
● ODD–1
All the options are set by default.
SMART Reporting
This field controls if the hard drive errors for the integrated
drives are reported during system startup. This technology
is part of the SMART(Self-Monitoring Analysis and Reporting
Technology) specification.
● Enable SMART Reporting
This option is not set by default.
USB Configuration
Allows you to enable or disable the internal USB configuration.
The options are:
● Enable USB Boot Support
● Enable Front USB Ports
● Enable Internal USB Ports
● Enable Rear USB Ports
All the options are set by default.
Front USB Configuration
Allows you to enable/disable Front USB ports.
The options are:
● USB3 Type A *
● USB Type C port 2 (Right) *
● USB Type C port 1 (Right) *
All the options are set by default.
Rear USB Configuration
Allows you to enable/disable Rear USB ports.
The options are:
● RearPort3 Top *
● RearPort1 Top *
● RearPort2 Top *
● RearPort3 Bottom *
● RearPort1 Bottom *
● RearPort2 Bottom *
All the options are set by default.
Internal USB Configuration
Allows you to enable/disable Internal USB ports.
● Internal Port 2
System Setup 95