Dell Precision Rack 7910 - Installing an Expansion Card into the Expansion-Card Riser 1

Figure 21. Removing and installing an expansion-card from expansion-card riser 1
1. tab A 2. expansion-card riser 1 cage
3. expansion-card connector 4. tab B
5. latch 6. expansion card
1. Install the expansion-card riser.
2. Follow the procedure listed in After working inside your system.
To see a video on how to remove & install a PCI card and riser, scan this QR code, or click here: http://
www.Dell.com/QRL/Workstation/R7910/PCI
Installing an expansion card into the expansion-card riser 1
1. Ensure that you read the Safety instructions.
54