Dell Pro WL5024 - Teams Application Integration

15
Behavior when running Microsoft Teams application
Action Button LED Behavior Voice Prompt
During Teams call
- Busy light turns red.
Evoke/Open Teams
notification
Single press on the
Teams button
-
USB-C Wireless
Audio Receiver LED
blinks purple.
Teams voice prompt
when receiving a
Teams notification.
Answer a Teams call
Single press on the
Call control button
- Busy light blinks red
when receiving a
Teams call and turns
red during the call.
Teams voice prompt
when receiving an
incoming call.
End a Teams call
Double press on the
Call control button
- Busy light turns off
when a Teams call
ends.
- USB-C Wireless
Audio Receiver LED
displays purple light.
Reject a Teams call
Long press on the
Call control button
for 2 seconds
- Busy light remains
red during a Teams
call.
- USB-C Wireless
Audio Receiver LED
displays purple light.
Raise hand during
Teams call
Long press on the
Teams button
- Busy light remains
red during Teams call.
NOTE: If the boom microphone is rotated up, the mute button will
not unmute the microphone.
NOTE: ANC is an Augmented Hearing experience, and hence the
effect is depending on the environment noise, type of music being
played, sensitivity of user hearing and other factors potentially
effecting its performance. It is recommended for user to make
sure headset is being worn at the correct position to ensure good
earcup sealing, minimize potential leakages of external noise into
the ear to have a good ANC effect.