EasyManuals Logo

Dell S2721DS User Manual

Dell S2721DS
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Setting up the monitor 31
Connecting the stand - S2721QS
NOTE: The stand is not factory-installed.
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the set up
instructions that were included with the stand.
To attach the monitor stand:
1. Follow the instructions on the flaps of packaging box to remove the stand
from the top cushion that secures it.
2. Remove the stand base and stand riser from the packaging cushion.
3. Align and place the stand riser on the stand base.
4. Open the screw handle at the bottom of the stand base and turn it clockwise
to secure the stand assembly.
5. Close the screw handle.

Table of Contents

Other manuals for Dell S2721DS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell S2721DS and is the answer not in the manual?

Dell S2721DS Specifications

General IconGeneral
Pixel pitch0.2331 x 0.2331 mm
Screen shapeFlat
Pixel density108.79 ppi
Backlight typeW-LED
Display diagonal27 \
Display technologyLCD
Native aspect ratio16:9
Vertical scan range48 - 75 Hz
Maximum refresh rate75 Hz
Response time (fast)5 ms
Horizontal scan range30 - 115 kHz
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NTSC coverage (typical)72 %
sRGB coverage (typical)99 %
Display number of colors16.78 million colors
Display brightness (typical)350 cd/m²
Supported graphics resolutions640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1600 x 900, 1920 x 1080 (HD 1080), 2560 x 1440
RMS rated power6 W
Number of speakers2
Product colorGray
Front bezel colorBlack
Heavy metals freeHg (mercury)
Market positioningBusiness
Sustainability certificatesRoHS, ENERGY STAR
HDMI version1.4
DisplayPort version1.2
Pivot angle-90 - 90 °
LED indicatorsPower
Tilt angle range-5 - 21 °
Panel mounting interface100 x 100 mm
Input current1.5 A
AC input voltage100 - 240 V
Power supply typeInternal
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (max)40 W
Annual energy consumption29 kWh
Power consumption (standby)0.2 W
Power consumption (typical)19 W
Operating altitude0 - 5000 m
Non-operating altitude0 - 12192 m
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 80 %
Package depth819.91 mm
Package width139.95 mm
Package height446.79 mm
Package weight8900 g
Cables includedAC, HDMI
Harmonized System (HS) code85285210
Ethernet LAN (RJ-45) ports0
Weight and Dimensions IconWeight and Dimensions
Bezel width (side)7.4 mm
Depth (with stand)174.7 mm
Height (with stand)510.1 mm
Weight (with stand)6200 g
Bezel width (bottom)21.6 mm
Depth (without stand)55.4 mm
Width (without stand)611.6 mm
Height (without stand)364.6 mm
Weight (without stand)4400 g

Related product manuals