Setting up the monitor │ 37
Removing the monitor stand - S2721D
NOTE: To prevent scratches on the LCD screen when removing the
stand, ensure that the monitor is placed on a soft, clean surface.
NOTE: The following instructions are applicable only for removing the
stand that was shipped with your monitor. If you are removing a stand
that you purchased from any other source, follow the set up
instructions that were included with the stand.
To remove the stand:
1. Pl
ace the monitor on a soft cloth or cushion.
2. Pr
ess the dimple on the VESA cover to release it from the back of the display.
3. Using a long screwdriver, push the release latch located in the gap just above
the stand.
4. Onc
e the latch is released, slide the stand assembly away from the monitor.
To Next Page
