Dell S2721DS - Page 44

44  │  Operating the monitor
Input Source Use the Input Source menu to select between the
different video signals that may be connected to your
monitor.
DP Select the DP input when you are using the
DisplayPort (DP) connector. Press the
button to
confirm the selection.
HDMI 1 Select the HDM
I 1 input when you are using the
HDMI connector. Press the
button to confirm the
selection.
HDMI 2 Select the HDM
I 2 input when you are using the
HDMI connector. Press the
button to confirm the
selection.
Auto Select Turning on the function allows you to scan for
availab
le input sources.
Reset Input
Sour
ce
Resets your monitor input settings to the factory
settings.