EasyManua.ls Logo

Dell S2722DC - Connecting Your Monitor; Connecting the USB Type-C and Power Cables

Dell S2722DC
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting up the monitor 31
Connecting your monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety instructions.
NOTE: Dell monitors are designed to w
ork optimally with Dell-supplied
inbox cables. Dell does not guarantee the video quality and performance
if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The
appearance of the computer may vary.
To connect your monitor to the computer:
1. T
urn off your computer and disconnect the power cable.
2. Conne
ct the USB Type-C cable (shipped with your monitor) or the HDMI
cable from your monitor to the computer. (See Bottom view for details.)
3. C
onnect the USB 3.2 Gen 1 peripherals to the USB 3.2 Gen 1 downstream
ports on the monitor.
Connecting the USB Type-C and power cables
NOTE: Use the USB Type-C cable shipped with monitor only.
This port supports DisplayPort Alternate Mode (DP1.2 standard only).
The USB Type-C power delivery compliant port (PD Version 3.0) delivers up
to
65 W of power.
If your notebook requires more than 65 W to operate and the battery is
d
rained, it may not be powered up or charged with the USB PD port of this
monitor.

Table of Contents

Related product manuals