Operating the monitor │ 51
OSD warning message
When the monitor does not support a particular
resolution mode, you will see the
following message:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor.
The recommended mode is 2560 x
1440.
NOTE: The message may slightly differ, depending on the connected
input signal.
You will see the following message before the DDC
/CI function is disabled:
When you adjust the Brightness level for the first time, the following message
appears:
NOTE: If you select Yes, the message will not appear the next time you
change the Brightness setting.
To Next Page
Loading...
