Dell S3422DWc - Electrical Specifications

About your monitor │ 17
Electrical specifications
Model S3422DW
Video input signals HDMI 2.0 (HDCP), 600 mV for each differential line,
100 ohm input impedance per differential pair
DP 1.2, 600 mV for each differential line, 100 ohm
input impedance per differential pair
AC input voltage/
frequency/current
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.6A
(max.)
Inrush current 120 V: 30 A (Max.) at 0°C (cold start)
240 V: 60 A (Max.) at 0°C (cold start)
Power Consumption 0.3 W (Off Mode)1
0.3 W (Standby Mode)1
32 W (On Mode)1
95 W (Max)2
39 W (Pon)
3
122 kWh (TEC)
3
1
As dened in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting with maximum power loading on all USB ports.
3
Pon: Power consumption of On Mode measured with reference to Energy Star test
method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test
method.
This document is informational only and reects laboratory performance. Your product
may perform dierently, depending on the software, components and peripherals
you ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.