10
Technical Specifications
Operate the system at an ambient temperature not higher than 113°C.
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly
replaced.
NOTE: Replace the battery only with same or equivalent type. Dispose of the batteries according to
the manufacturer's instructions.
Table 6. S4820T Chassis Physical Design
Parameter Specifications
Height 1.71 inches (43.5 mm)
Width 17.09 inches (434 mm)
Depth 18.11 inches (460 mm)
Rack clearance required 5 inches (12.7 cm)
Weight 21.7 lbs (9.86 kg)
Table 7. Environmental Parameters
Parameter Specifications
Operating temperature 32° to 113°F (0° to 45°C)
Storage temperature -40° to 158°F (-40° to 70°C)
Relative humidity
Storage humidity
5 to 90 percent, non-condensing
5 to 95 percent, non-condensing
Maximum thermal output 1153.265 BTU/hr
Maximum altitude No performance degradation to 10,000 feet (3,048
meters)
Shock Meets Bellcore Zone 4 earthquake requirements
(MIL-STD-810)
Table 8. AC Power Requirements
Parameter Specifications
AC power supply 100 ~ 240 VAC 50/60 Hz
Maximum current draw per system
5.8 A @ 398.02 Watts/100 VAC
2.9 A @ 398.02 Watts/200 VAC
Maximum power consumption
Typical power consumption
460 Watts
338 Watts
Technical Specifications
47
To Next Page
Loading...
Need help?
General