Need help?Do you have a question about the Dell Force10 S4810P and is the answer not in the manual?
General| Switching Capacity | 1.28 Tbps |
|---|---|
| Forwarding Rate | 952 Mpps |
| Manageable | Yes |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Input Voltage | 100-240 VAC |
| Form Factor | Rack-mountable |
| Rack Height | 1U |
| Power Supply | Dual, Hot-swappable |
| Product Type | Switch |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Latency | 480 ns |
| MAC Address Table Size | 128K entries |
Provides an overview of the S4820T as a top-of-rack switch with 10Gbps and 40Gbps ports.
Lists the key features and capabilities of the S4820T switch.
Lists the standard ports available on the S4820T chassis.
Provides recommendations for choosing a suitable location for the S4820T installation.
Specifies requirements for placing the S4820T within a cabinet.
Covers essential steps for grounding the equipment rack during installation.
Outlines the grounding requirements for the S4820T within a Common Bond Network.
Details power cord requirements and connection procedures for the S4820T.
Explains how to install the Dell ReadyRails system for rack mounting the S4820T.
Covers the final steps for front-rack installation of the S4820T switch.
Explains how to connect the ground cable to the S4820T chassis for safety.
Describes how to split 40G QSFP+ ports into multiple 10G ports.
Provides instructions and checks before powering up the S4820T system.
Explains how to connect S4820T switches for stacking.
Details the process of installing AC or DC power supplies into the S4820T.
To Next Page
