Need help?Do you have a question about the Dell Force10 S55 and is the answer not in the manual?
General| Model | Dell Force10 S55 |
|---|---|
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| Rack Units | 1U |
| Layer | Layer 2/3 |
| Manageable | Yes |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Ports | 48 x 10/100/1000Base-T ports 4 x 10GE SFP+ ports |
| Power Supply | Dual hot-swappable power supplies |
| Jumbo Frame Support | Yes |
| Weight | 15.4 lbs (7 kg) |
| Operating Humidity | 10% to 90% (non-condensing) |
Explains graphical symbols used for hazards and alerts in the document.
High-level overview of the Dell Force10 S55 switch/router, including features and ports.
Guidelines for preparing the installation environment, including site selection criteria.
Step-by-step instructions for installing the S55 chassis into a rack or cabinet.
Procedures for connecting power and safely starting the S55 system after installation.
Details on S55 power supply options, installation, and replacement procedures.
Information on S55 fan modules, installation, and replacement.
How to connect to the S55 system via RJ45 or USB-B console ports.
Technical specifications including physical design, environmental limits, and power requirements.
Safety and regulatory compliance information, including NEBS standards.
Information on accessing Dell iSupport and contacting technical assistance.
Procedure for obtaining replacement hardware for the S55 system.
To Next Page