Need help?Do you have a question about the Dell Force10 S50N Series and is the answer not in the manual?
General| Rack Units | 1U |
|---|---|
| Jumbo Frames | Up to 9216 bytes |
| Product Type | Switch |
| Form Factor | Fixed |
| Power Supply | Dual redundant power supplies |
| VLAN Support | Yes |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Model | Dell Force10 S50N Series |
Explains graphic symbols used to denote hazards during switch handling.
Lists documentation related to FTOS and SFTOS configurations.
Lists the necessary items required to install the system.
Details the key capabilities and specifications of the switch models.
Describes the available physical connection ports on the switch.
Explains how to derive chassis status information.
Details the meaning of various status LEDs on the switch front panel.
Outlines requirements for choosing an appropriate installation location.
Specifies criteria for placing the switch within a cabinet.
Provides instructions for mounting the switch in an equipment rack.
Details ventilation requirements for proper switch operation.
Covers power supply options and considerations for the switch.
Provides guidelines for storing system components before installation.
Lists the tools necessary for installing the switch.
Instructions for installing 10GbE or stacking modules into expansion slots.
Guide for positioning the switch on a stable tabletop surface.
Procedures for mounting the switch in a rack or cabinet.
Information on adding, removing, or swapping units in a stack.
Details on how to connect power to the switches in a stack.
Lists the components included in the optional redundant power supply kit.
Explains AC and DC power connection options for the switch.
Step-by-step guide to installing the S50V redundant power supply.
Instructions for connecting the DC-to-DC cable for the S50V PSU.
Guide for installing the 180W DC power supply for the S50N.
Lists the DC components associated with backup power.
Procedures for installing the optional External Power Shelf.
Steps to insert an S50N PSU into the External Power Shelf.
Instructions for connecting the DC-to-DC cable for the S50N PSU.
How to connect to and use the switch's console port.
Details on configuring and using Power over Ethernet on S50V ports.
Information on installing optical transceivers like SFPs and XFPs.
Provides physical dimensions and rack clearance specifications.
Specifies operating and storage temperature, humidity, and altitude limits.
Details AC and DC power input requirements and consumption.
Lists safety and agency compliance certifications for the equipment.
Information on accessing Dell Force10 support resources online.
How to contact Dell Force10 TAC for support cases.
Instructions for finding the serial numbers of the switch and components.
Steps to follow for requesting replacement hardware.
To Next Page