Dell Force10 S50N Series User Manual

Switch Specifications | 47
7
Switch Specifications
This chapter contains these sections:
• Chassis Physical Design
• Environmental Parameters on page 48
• Power Requirements on page 48
• Agency Compliance on page 49
NOTE: The specifications in this chapter, unless otherwise noted, pertain to the S50V (catalog # S50-01-GE-
48T-V) and S50N (catalog # S50-01-GE-48T-AC for AC-powered version of S50N; catalog # S50-01-GE-48T-
DC for S50N-DC).
Chassis Physical Design
Parameter Specifications
Weight (weight with factory-installed components) 14.41 pounds (approx.) (6.54 kg)
Height 1.73 inches (4.4 cm)
Width 17.32 inches (44 cm) (19" rack-mountable)
Depth 16.73 inches (42.5 cm) (standard 1 rack unit – 1RU)
Rack clearance required Front: 5 inches (12.7 cm)
Rear: 5 inches (12.7 cm)

Dell Force10 S50N Series Specifications

General

Rack Units	1U
Jumbo Frames	Up to 9216 bytes
Product Type	Switch
Form Factor	Fixed
Power Supply	Dual redundant power supplies
VLAN Support	Yes
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Model	Dell Force10 S50N Series