Dell Force10 S4810P User Manual

8 | About this Guide
www.dell.com | support.dell.com
Related Publications
For more information about the S4820T system, refer to the following documents:
• FTOS Configuration Guide for the S4820T System
• FTOS Command Line Reference Guide for the S4820T System
• FTOS Release Not es for the S4820T System
NOTE: For the most recent documentation and software, visit iSupport (registration for access to some
sections is required): http://www.force10networks.com/CSPortal20/Main/SupportMain.aspx
Warning This symbol informs you about hardware handling that could result in injury.
ESD
Warning
This symbol informs you that you must take electrostatic precautions when handling the device.
Table 1-1. Information Symbols (continued)
Symbol Warning Description

Dell Force10 S4810P Specifications

General

Switching Capacity	1.28 Tbps
Forwarding Rate	952 Mpps
Manageable	Yes
Jumbo Frame Support	Yes
Jumbo Frame Size	9216 bytes
Input Voltage	100-240 VAC
Form Factor	Rack-mountable
Rack Height	1U
Power Supply	Dual, Hot-swappable
Product Type	Switch
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	10% to 90% (non-condensing)
Latency	480 ns
MAC Address Table Size	128K entries