Need help?Do you have a question about the Dell S4148F-ON Series and is the answer not in the manual?
General| Uplink Ports | 6 x 40GbE QSFP+ |
|---|---|
| Switching Capacity | 1.44 Tbps |
| Power Supply | Dual, Hot-swappable |
| Airflow | Front-to-back or back-to-front |
| Product Type | Switch |
| Form Factor | Rack-mountable |
| Flash Memory | 16GB |
| Input Voltage | 100-240 VAC |
| Operating Temperature | 0°C to 45°C |
| Model | S4148F-ON |
| Category | Switch |
| Storage Temperature | -40°C to 70°C |
| AC Input Frequency | 50/60 Hz |
| Latency | 800ns |
| Rack Units | 1 |
| Jumbo Frame Support | 9, 216 bytes |
| Software | Dell EMC Networking OS10 |
| CPU | Intel x86 |
| RAM | 8GB |
| Operating System | Dell EMC OS10 |
| Management | CLI, SNMP |
| Dimensions (W x D x H) | 440 x 440 x 44 mm |
| Humidity | 5% to 95% non-condensing |
| Ports | 48 x 10GbE SFP+ |
| Operating Humidity | 10% to 90% (non-condensing) |
Introduces the S4100-ON Series switch, its form factor, and port types.
Lists the key features of the S4100-ON Series switches.
Displays LED behavior during ONIE operations for S4128F-ON and S4148F-ON.
Guides on connecting the switch to a power source and safety precautions.
Instructions on inspecting and unpacking the switch and its accessories.
General instructions for installing the switch into a rack or cabinet.
Guidance on using the ReadyRails rack mounting system for installation.
Instructions on installing optical transceivers in the switch.
Steps for powering up the switch, including reinspection and safety checks.
Provides instructions for installing AC or DC power supplies.
Steps for replacing AC or DC power supplies.
Instructions on how to install fan modules.
Steps for replacing a fan module.
Lists operating and storage environmental specifications for the switch.
Specifies the AC power input requirements for the switch.
Specifies the DC power input requirements for the switch.
To Next Page