Need help?Do you have a question about the Dell PowerSwitch S4128F-ON and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Model | S4128F-ON |
| Uplink Ports | 4 x 100GbE QSFP28 |
| Power Supply | Dual, hot-swappable |
| Airflow | Front-to-back or back-to-front |
| Jumbo Frame Support | Yes, up to 9216 bytes |
| Latency | 800ns |
| Management | CLI, SNMP, REST API |
| Dimensions (W x D x H) | 43.0 cm x 4.3 cm |
Lists related documentation for the S4100-ON Series, including release notes and user guides.
Explains the meaning of information symbols used in the book, such as NOTE and CAUTION.
Provides an overview of the S4100-ON Series switches, detailing their form factor and port configurations.
Details the various features offered by the S4100-ON Series switches, including port types and capabilities.
Lists the physical dimensions of the S4100-ON Series switches, including height, width, and depth.
Describes the LED displays located on the I/O and PSU sides of the switch.
Explains the meaning of the LED indicators on the S4100-ON Series switch during operations.
Lists required and optional components for the S4100-ON Series switch installation.
Details the different configurations available for the S4100-ON Series switches.
Describes the pull-out luggage tag on the PSU-side, containing switch ID information.
Details requirements for choosing a suitable installation location, considering safety and environmental factors.
Provides guidance on selecting and placing indoor cabinets for the S4100-ON Series switch.
Explains how to prepare and ground the equipment rack for switch installation.
Recommends grounding procedures for AC and DC powered S4100-ON Series switches.
Discusses the two airflow options (normal and reverse) supported by the switch's fans.
Covers connecting the switch to the appropriate power source and safety precautions.
Provides guidelines for properly storing the switch and its components when not in use.
Provides step-by-step instructions for unpacking the switch and checking its contents.
Describes options for mounting the switch in a rack or cabinet, including rack types.
Guides on using the provided ReadyRails system for rack mounting the switch.
Details the procedure for installing the switch using the 1U tool-less mounting method.
Explains the steps for flush-mounting the switch in a two-post rack.
Details the process for center-mounting the switch in a two-post rack.
Describes how to install the switch using a four-post threaded mounting method.
Covers mounting the switch in various rack configurations like front-rack, two-post, flush, center, or four-post.
Provides instructions for installing the switch in a 1U front-rack configuration.
Details the procedure for installing optical transceivers into the switch ports.
Covers the steps and recommendations for powering on the switch after installation.
Describes the process for removing and replacing a switch, including configuration backup.
Lists the available power supply options for the S4100-ON Series switch.
Explains how to install AC or DC power supply units into the switch.
Details the procedure for replacing a failed AC or DC power supply unit.
Describes how to connect the DC power supply to the switch using the provided cable.
Identifies the fan components available for the S4100-ON Series switch.
Details the process for installing fan modules into the switch chassis.
Explains how to replace a faulty fan module in the switch.
Guides on accessing the switch using the RS-232 console port.
Details how to connect and access the switch via the USB-B console port.
Explains how to mount and use USB storage devices with the switch.
Describes the ONIE service discovery methods for locating and installing an operating system.
Details the physical dimensions, weight, and rack clearance requirements for the switch.
Lists the IEEE standards that the S4100-ON Series switch complies with.
Outlines the safety and agency requirements the switch complies with, including FCC and EU directives.
Covers emissions and immunity standards related to electromagnetic compatibility.
Provides information on recycling and disposing of the switch according to WEEE directive.
To Next Page