Need help?Do you have a question about the Dell PowerSwitch S4048-ON and is the answer not in the manual?
General| Switching Capacity | 1.44 Tbps |
|---|---|
| Airflow | Front-to-back or back-to-front |
| Manageable | Yes |
| Total Number of Network Ports | 54 |
| Uplink Port | 6 x 40GbE QSFP+ |
| Number of 40 Gigabit Ethernet Ports | 6 |
| Number of 10 Gigabit Ethernet Ports | 48 |
| Media Type Supported | Optical Fiber, Twisted Pair |
| Ethernet Technology | 10 Gigabit Ethernet, 40 Gigabit Ethernet |
| Layer Supported | Layer 2, Layer 3 |
| Form Factor | Rack-mountable |
| Operating Temperature | 32 °F to 104 °F (0 °C to 40 °C) |
| Power Supply | Dual, hot-swappable |
| Dimensions | 1.7 inches |
| Product Type | Layer 3 Switch |
| Port/Expansion Slot Details | 48 x 10GbE SFP+, 6 x 40GbE QSFP+ |
| Network Technology | 40GBase-X |
| Input Voltage | 100-240 VAC |
| Height | 1.7 inches |
| Width | 17.3 inches |
| Ports | 48 x 10GbE, 6 x 40GbE |
| Weight | 24.5 lbs |
Explains the importance of grounding the equipment rack during mounting procedures.
Recommends grounding the switch using the common bond network (CBN) for safety.
Provides critical warnings and requirements for achieving NEBS compliance, including port usage and power connections.
Guides on inspecting the container and unpacking the S4048-ON switch and its included accessories.
Explains options for mounting the switch in a rack, including ReadyRails system usage.
Guides on powering up the S4048-ON switch after installation, including pre-power checks.
Provides step-by-step instructions for installing an AC power supply unit into the switch.
Details the procedure for replacing a failed AC power supply unit in the S4048-ON.
Guides on how to install DC power supply units into the S4048-ON switch.
Provides instructions for installing fan modules into the S4048-ON chassis.
Details the steps for replacing a faulty fan module in the S4048-ON.
Outlines the safety and agency requirements the S4048-ON is designed to meet.
Details requirements for achieving NEBS compliance, including cable usage and airflow.
Lists various safety standards and agency certifications that the S4048-ON adheres to.
Lists emissions and immunity standards related to the electromagnetic compatibility of the S4048-ON.
To Next Page