Dell PowerSwitch S4048-ON User Manual

NOTE: Use the AC power cords with Dell equipment only. Do not use Dell AC power cords with any unauthorized hardware.
Figure 24. Japan: Warning Label
Korean Certification of Compliance
Figure 25. Korean Certification of Compliance
Figure 26. Korean Package Label
Safety Standards and Compliance Agency
Certifications
● CUS UL 60950-1, 2nd Edition
○ Meets or exceeds Hi Pot and Ground Continuity testing per UL 60950-1.
● CSA 60950-1-03, 2nd Edition
● EN 60950-1, 2nd Edition
● EN 60825-1, 1st Edition
● EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification Requirements and User’s Guide
● EN 60825-2 Safety of Laser Products—Part 2: Safety of Optical Fiber Communication Systems
Specifications
39

Dell PowerSwitch S4048-ON Specifications

General

Switching Capacity	1.44 Tbps
Airflow	Front-to-back or back-to-front
Manageable	Yes
Total Number of Network Ports	54
Uplink Port	6 x 40GbE QSFP+
Number of 40 Gigabit Ethernet Ports	6
Number of 10 Gigabit Ethernet Ports	48
Media Type Supported	Optical Fiber, Twisted Pair
Ethernet Technology	10 Gigabit Ethernet, 40 Gigabit Ethernet
Layer Supported	Layer 2, Layer 3
Form Factor	Rack-mountable
Operating Temperature	32 °F to 104 °F (0 °C to 40 °C)
Power Supply	Dual, hot-swappable
Dimensions	1.7 inches
Product Type	Layer 3 Switch
Port/Expansion Slot Details	48 x 10GbE SFP+, 6 x 40GbE QSFP+
Network Technology	40GBase-X
Input Voltage	100-240 VAC
Height	1.7 inches
Width	17.3 inches
Ports	48 x 10GbE, 6 x 40GbE
Weight	24.5 lbs