Need help?Do you have a question about the Dell PowerSwitch N3200-ON Series and is the answer not in the manual?
General| Series | N3200-ON |
|---|---|
| Layer | Layer 2/3 |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Data Transfer Rate | 1/10 Gbps |
| PoE Support | Yes |
| Power Supply | Internal |
| OS | Dell Networking OS |
| Management | CLI, Web |
| Form Factor | Rack-mounted |
Lists other relevant documentation for the N3200-ON/E3200-ON Series.
Explains the meaning of various information symbols used in the guide.
Provides an overview of the N3200-ON/E3200-ON Series switches.
Details the key features and specifications of the N3200-ON/E3200-ON Series switches.
Lists the physical dimensions and weight of the N3200-ON/E3200-ON Series switches.
Explains the behavior of switch LEDs during ONIE operations.
Lists the required components for a successful switch installation.
Details the different configurations available for the N3200-ON/E3200-ON Series switch.
Explains the function and information contained on the switch's pull-out luggage tag.
Describes the location and operation of the switch's reset button.
Provides guidelines for choosing a suitable location for switch installation.
Specifies requirements for placing the switch within a cabinet.
Details the process and considerations for mounting the switch in a rack.
Explains the importance and procedure for grounding the switch.
Discusses fan modules and airflow directions for cooling the switch.
Covers power connection requirements and safety precautions for the switch.
Provides guidelines for properly storing the switch and its components.
Outlines methods for installing the switch into a rack or cabinet.
Instructions on how to attach the ground cable to the switch.
Describes the procedure for placing the switch on a desktop.
Step-by-step guide for ceiling-mounting the N3208PX-ON switch.
Step-by-step guide for wall-mounting the N3208PX-ON switch.
Instructions for installing the switch using DIN buckle rails.
Guide for installing the switch using standard brackets in a two-post rack.
Instructions for installing the switch using offset brackets in a two-post rack.
Guide for installing the switch using flush-mount brackets in a two-post rack.
Steps for mounting the switch on a wall or ceiling.
General instructions for installing the switch using ReadyRails.
Procedure for installing optical transceivers into the switch ports.
Guidance on powering on the switch after installation.
Procedures for uninstalling and replacing a switch.
Instructions for assembling the power adapter holder.
Steps to install the EPA holder on a wall or ceiling.
Procedure for installing the EPA holder onto DIN rails.
Guide for installing a single EPA with the switch in a four-post rack.
Instructions for center-mounting a single EPA with the switch in a two-post rack.
Guide for front-mounting a single EPA with the switch in a two-post rack.
Steps for front-mounting dual EPAs with the switch in a two-post rack.
Instructions for center-mounting dual EPAs with the switch in a two-post rack.
Lists the power supply components and options for the switch.
Procedure for installing AC or DC power supply units into the switch.
Steps for replacing an existing AC or DC power supply unit.
Details on connecting the 550W DC power supply.
Instructions for connecting the 1300W DC power supply.
Guide on connecting the External Power Supply (EPS) shelf to the switch.
Identifies the fan components for the N3200-ON/E3200-ON Series switches.
Step-by-step guide for installing fan modules into the switch.
Instructions for replacing faulty fan modules.
How to access the switch via the RJ45 console port.
Guide to accessing the switch using the MicroUSB Type-B console port.
Steps for mounting USB storage devices for file transfers.
Preparations before installing an OS using ONIE.
Verifies ONIE functionality using the onie-sysinfo command.
Procedure to uninstall an existing OS before installing a new one.
Guides for installing a Network Operating System (NOS) using ONIE.
Details the physical dimensions and weight of the switches.
Information on PoE power budgets based on PSU configurations.
Lists the IEEE standards the switch complies with.
Overview of safety and agency compliance certifications.
FCC compliance statement for the digital device.
EU directive conformance for electromagnetic compatibility.
VCCI compliance statement for Class A equipment in Japan.
Details Korean certification requirements for the switch.
Lists various safety and compliance certifications.
Information on the switch's electromagnetic compatibility.
Guidelines for recycling and disposing of the switch.
To Next Page