Name: Dell PowerSwitch S4048-ON
Brand: Dell
Rating: 5 (1 reviews)

To Next Page

To Previous Page

About this guide

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting, inserting

optional modules, and connecting to a power source.

CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this

equipment.

NOTE: Only trained and qualified personnel can install this equipment. Read this guide before you install and power on this

equipment. This equipment contains two power cables. Disconnect both power cables before servicing.

NOTE: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.

Figure 1. Class 1 laser product

NOTE:

When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical

transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures.

Topics:

• Related documents

Questions and Answers:

Need help?

Do you have a question about the Dell PowerSwitch S4048-ON and is the answer not in the manual?

Dell PowerSwitch S4048-ON Specifications

General

Switching Capacity	1.44 Tbps
Airflow	Front-to-back or back-to-front
Manageable	Yes
Total Number of Network Ports	54
Uplink Port	6 x 40GbE QSFP+
Number of 40 Gigabit Ethernet Ports	6
Number of 10 Gigabit Ethernet Ports	48
Media Type Supported	Optical Fiber, Twisted Pair
Ethernet Technology	10 Gigabit Ethernet, 40 Gigabit Ethernet
Layer Supported	Layer 2, Layer 3
Form Factor	Rack-mountable
Operating Temperature	32 °F to 104 °F (0 °C to 40 °C)
Power Supply	Dual, hot-swappable
Dimensions	1.7 inches
Product Type	Layer 3 Switch
Port/Expansion Slot Details	48 x 10GbE SFP+, 6 x 40GbE QSFP+
Network Technology	40GBase-X
Input Voltage	100-240 VAC
Height	1.7 inches
Width	17.3 inches
Ports	48 x 10GbE, 6 x 40GbE
Weight	24.5 lbs