Specifications
This chapter lists the S4048–ON specifications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type of battery. Dispose of the batteries according to the manufacturer
instructions.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• Network Equipment Building Systems Compliance
• USA Federal Communications Commission Statement
• European Union Directive Conformance Statement
• Japan VCCI Compliance for Class A Equipment
• Korean Certification of Compliance
• Safety Standards and Compliance Agency Certifications
• Electromagnetic Compatibility
• Product recycling and disposal
Chassis physical design
Table 6. Chassis physical design
Parameter Specifications
Height 43.5 mm (1.71 inches)
Width 434 mm (17.09 inches)
Depth 460 mm (18.11 inches)
Chassis weight with factory-installed components 9.86 kg (21.7 lbs)
Rack clearance required
Front: 12.7 cm (5 inches)
Rear: 12.7 cm (5 inches)
Table 7. Environmental parameters
Parameter Specifications
Operating temperature 0° to 45°C (32° to 113°F)
Operating humidity 5% to 85% (RH), non-condensing
Storage temperature –40° to 70°C (–40° to 158°F)
Storage humidity 5% to 95%, non-condensing
Maximum thermal output 1153.265 BTU/hr
Maximum operational altitude 3,048 meters (10,000 ft)
Maximum nonoperational altitude No performance degradation to 10,668 meters (35,000 ft)
9
36 Specifications
To Next Page
Loading...
