About your monitor | 17
DP Multi-Stream Transport (MST) modes
MST Source Monitor Maximum number of external monitors that can be
supported
2560 x 1440/60 Hz (8 bit) 4
2560 x 1440/120 Hz (8 bit) 2
Thunderbolt
TM
4 out for daisy chain
OSD Display Info:
Link rate (current)
Maximum number of external monitors that can be supported
Thunderbolt (60 Hz
or 120 Hz)
2
DP Alt mode HBR3 2 (60 Hz), 1 (120 Hz)
DP Alt mode HBR2 1 (60 Hz)
Electrical specifications
Video input signals •Digital video signal for each dierential line
Per dierential line at 100 ohm impedance
•DP/HDMI/Thunderbolt
TM
4 signal input support
Input voltage/
frequency/ current
100-240 VAC / 50 or 60 Hz ± 3 Hz / 2.65 A (maximum)
Inrush current 120V: 42 A (Max.)
240V: 80 A (Max.)
Inrush current is measured at an ambient temperature of
0°C (cold start.).
Power Consumption 0.3 W (Off Mode)
1
0.5 W (Standby Mode)
1
1.5 W (Networked standby Mode)
1
24.4 W (On Mode)
1
225 W (Max)
2
18.9 W (P
on
)
3
65 kWh (TEC)
3
1
As dened in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting with maximum power loading on all USB ports.
3
P
on
: Power consumption of On Mode as dened in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as dened in Energy star 8.0 version.