Use the Display Settings to adjust image.
Adjust the image ratio as 16:9, 4:3, 1:1, Aspect or full screen.
Use the or to adjust image left or right. Minimum is '0' (-). Maximum is '100' (+).
Use the or to adjust image up or down. Minimum is '0' (-). Maximum is '100' (+).
NOTE: Horizontal Position and Vertical Position Adjustments are only available for "VGA" input.
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'.
Improve the motion picture quality by reducing noise on image edge.
NOTE: Noise Reduction is only available for Multimedia, Game and Movie modes.
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the or to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Allows you to increase the level of contrast to provide sharper and more detailed image quality
. (Brightness control is disabled while
in Dynamic Contrast mode and will be grayed out.)
Touch the button to select the Dynamic Contrast "On" or "Off" .
NOTE: Dynamic Contrast is only available for Game and Movie color preset modes.
Displays the monitor's current settings.
Select this option to restore default display settings.
Select this option to adjust the audio settings.
Use the Line Out Source menu to select between different audio signals that may be connected to your monitor.
To Next Page
Loading...
