Dell U3011 - Resolution Specifications; Supported Video Modes; Preset Display Modes; Electrical Specifications

*U3011 color gamut (typical) is based on CIE1976 (117%) and CIE1931 (102%) test standards.
Resolution Specifications
Analog signal input
Digital signal Input (DVI dual link and DisplayPort and HDMI)
Supported Video Modes
Preset Display Modes
Electrical Specifications
Color depth
1.07 billion colors
Color Gamut
117%* NTSC typical / 100% sRGB, 99% Adobe RGB
Horizontal scan range
30 kHz to 99 kHz
Vertical scan range
56Hzto86Hz
Optimal preset resolution
2048 x 1280 at 60 Hz
Highest preset resolution
2048 x 1280 at 60 Hz
Horizontal scan range
30 kHz to 112.5 kHz
Vertical scan range
56Hzto86Hz
Optimal preset resolution
2560 x 1600 at 60 Hz
(DVI/DisplayPort input sources)
1920 x 1200 at 60 Hz (HDMI
input source)
Highest preset resolution
2560 x 1600 at 60 Hz
(DVI/DisplayPort input sources)
1920 x 1200 at 60 Hz (HDMI
input source)
Video display capabilities (HDMI
playback)
480i/480p/576i/576p/720p/1080i/1080p
Video display capabilities (Component
playback)
480i/480p/576i/576p/720p/1080i/1080P
Display Mode
Horizontal Frequency
(kHz)
Vertical Frequency (Hz)
Pixel Clock (MHz)
Sync Polarity
(Horizontal/Vertical)
VESA, 720 x 400
31.47
70.0
28.322
-/+
VESA, 640 x 480
31.47
60.0
25.175
-/-
VESA, 640 x 480
37.5
75.0
31.5
-/-
VESA, 800 x 600
37.88
60.0
40
+/+
VESA, 800 x 600
46.88
75.0
49.5
+/+
VESA, 1024 x 768
48.36
60.0
65.0
-/-
VESA, 1024 x 768
60.02
75.0
78.75
+/+
VESA, 1152 x 864
67.5
75.0
108
+/+
VESA, 1280 x 800
49.7
60.0
83.5
-/+
VESA, 1280 x 1024
64.0
60.0
108
+/+
VESA, 1280 x 1024
80.0
75.0
135
+/+
VESA, 1600 x 1200
75.0
60.0
162
+/+
VESA, 1920 x 1200
74.6
60.0
193.5
-/+
VESA, 2048 x 1280
78.82
60.0
174.25
+/-
VESA, 2560 x 1600
98.71
60.0
268.5
+/-
Video input signals
Analog RGB, 0.7 Volts +/-5%, positive polarity at 75
ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line,
positive polarity at 50 ohm input impedance
HDMI TMDS, 600 mV for each differential line,
positive polarity at 50 ohm input impedance or 100
Ohm per differential pair
DisplayPort 1.1a signal input support
Component, Y 0.7 volt, Pb, Pr are all 0.7 volt(p-p),